Energy
Subsectors
Upstream
Oil and Gas
Facility design:
Gathering systems
Well-site facilities
Field compressor stations
Phase separation
Desalting
Gas dehydration
Production
water handlingEmulsion breaking
Remote communication systems
Enhanced oil recovery
Carbon capture and sequestration
Thermal recovery
Water floods
Oil sands
Midstream
Oil and Gas
Pipeline and pipeline systems:
Compressor and pump stations
Field devices
Tie-ins
LACT units, pigging systems
River crossings SCADA and remote communication
Valve stations
Gas processing
Sweet and sour
NGL recovery
Terminalling
Storage
Blending
Downstream
Oil and Gas
Refining
Bitumen upgrading
LNG processing
Syngas production
Gas to liquids
LNG/CNG fueling stations
Industrial gas utilities and offsites
Water, wastewater & utilities
Renewable and thermal power
Generation and cogeneration
Hydrogen Technology
Hydrogen pipelines and transportation equipment
Fuel cell technology
Fueling stations
Studies and safety analysis
Renewable Hydrogen
Blue and Green hydrogen
Storage
Mixing and blending
Hydrogen in chemical production
Renewable and Biofuels
Bio-diesel
Renewable diesel
Renewable gas
Ethanol
Bio-crude
Bio-gas
Biojet biogenic
Feedstock pretreatment and blending
Gas to liquids.
Biomass to liquids and waste liquids
Renewable natural gas (RNG)
Natural
Gas
Gas processing - sweet and sour,
NGL recovery
LNG LNG/CNG fuelling stations
Fuelling station design
Renewable natural gas (RNG)
Past Projects
Biodiesel Production
Plant
Client: Benefuel
Location: Beatrice, Kuantan Malaysia, Indonesia, Sarnia, ON
Project Description:
Beatrice NE: SDE was the technical expert evaluator to participate in the independent review of the business and technical components of a 2nd-generation biodiesel production and refining platform for the first commercial installation using Benefuel’s proprietary technology. In addition, SDE supported plant commissioning, start-up and operations oversight and direction.
SDE also provided an ‘as-is’ assessment and identified methods to de-bottleneck the system.
Kuantan: SDE performed all engineering from FEL-2 through FEL-3 for the retrofit of an existing biodiesel production plant to utilize Benefuel’s technology.
Indonesia: SDE produced a FEED package for a fully modular commercial plant to use PFAD, SPO, and OPEFB oils.
Sarnia, ON: SDE helped Benefuel to secure over $20 Million in funding for a new 75 MMLPY plant to be located in Sarnia, ON. SDE also was responsible for all engineering activities and deliverables to reach an AACE Class II TIC cost estimate.
Critical Operations & Management Support
Client: Confidential
Project: Almost 900 projects over the last eight Years
Project Description: Project Descriptions include:
Pipelines
Condensers
Sulfur Plants
Compression
Energy Efficiency
Environmental
Pumping
Controls
Structural
Heaters
Utilities
HAZOP
Heat Exchangers
Water Reuse
Root Cause Failure Analysis for Oil & Gas, LNG and NGL
Coolers
Process Towers
Special Info: Sacré-Davey is one of this premier natural gas infrastructure company’s preferred engineering firms for crucial projects of all size, and capital support.
Regional LNG
Detailed Design
Client: Altagas
Project: Regional LNG Detailed Design
Project Description: Acted as owner’s engineer during pre-FEED, FEED and detail design engineering regional Liquefied Natural Gas (LNG) plant as well as designing all Balance-of-Plant and interconnecting systems.
SDE was responsible for reviewing vendor designs and coordinating process conditions, civil design and plant layout, foundations, piping and electrical interconnections, procurement support, and supervisory controls. SDE also prepared permit submissions for the BC Oil and Gas Commission (BCOGC).
Natural Gas
Terminal Expansion
Client: Confidential
Project: Terminal Expansion
Project Description:
Engineering drawings and work package for the demolition of obsolete equipment from the new tank farm area;
Civil/structural engineering drawings and work packages for the construction of a new tank farm;
Containment area and associated infrastructure;
Design for tender of new condensate tanks, pump specification;
Design of interconnecting piping (including five pipe racks and foundations)
Upgrading of the fire protection system.
Hydrogen Recovery & Utilization System
Client: HTEC
Project: Hydrogen Recovery & Utilization System
Project Description:
Sacré-Davey Engineering delivered an integrated waste hydrogen gas collection, purification, and compression, storage and distribution facility. Flow up to 5,500,000 scfd of hydrogen need to be collected from 2 separate sources, dehydrated, scrubbed of contaminants using SDE’s proprietary ScrubTechTM technology and ultimately purified using Pressure Swing Adsorption Technology.
Purified gas was compressed to 5000 psig using a combination of reciprocating and diaphragm compressors and stored in carbon fiber-reinforced aluminum storage tanks. Overflow gas is piped to combustion in a boiler.
Sacré-Davey Engineering provided full project scope definition, project management, engineering, HAZOP and instrumentation.